Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   + Steering
   - Suspension bracket geometry
      Check of geometrical parameters of the unit of bridges
      Check and adjustment of height of road gleams
      The angles of installation of wheels of the car - the general information
      Check and adjustment of disorder and vybeg
      Check and adjustment of convergence
      Check of size of a divergence of forward wheels in turn
+ Body
+ Onboard electric equipment



Check and adjustment of convergence

Forward wheels

Check and adjustment of convergence of forward wheels

Check and adjustment of convergence of forward wheels


 PERFORMANCE ORDER

  1. The corresponding illustrative material is presented naillyustration to which all references which are found in the text belong.
  2. Establish forward wheels in rectilinear situation and record a steering wheel by means of special adaptation.

    Fixing of a steering wheel during the checking and adjustment of convergence of forward wheels

  3. Make sure of correctness of centering of the steering drive, - in the neutral provision of a lath an adjusting groove of hinged knot it has to be combined from valvate assembly of entrance knot of rack transfer (shooter), risky on the case. In case of need correct the provision of a steering wheel, having displaced its maximum on 1 tooth.
  4. For adjustment of convergence release lock-nuts (10f) and correct as appropriate the provision of tips of steering drafts (10), - track that boots were not overwound.

Back wheels

Check and adjustment of convergence of back wheels

Check and adjustment of convergence of back wheels


 PERFORMANCE ORDER

  1. The corresponding illustrative material is presented on сопр. illustrations to which all references which are found in the text belong.
  2. Check correctness of adjustment of road gleams of axes (see the Section Check and adjustment of height of road gleams), in case of need make the corresponding adjustments.
  3. Adjustment is made by means of eccentric bolts (60a) on support of fastening of longitudinal extensions (60) to a stretcher (50) of a back suspension bracket.