Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
- Power supply system and production of the fulfilled gases
   - Power supply system of petrol engines
      Check and adjustment of quantity of turns of the single course / moment of ignition/concentration WITH
      Dropping pressure in fuel system of the petrol engine
      Principle of functioning of a control system and injection of the petrol engine
      General check of system of injection of the petrol engine
      Check of injectors
      Removal and installation of components of an inlet air path
      Service of elements of the drive of a butterfly valve
      Depletion of the fuel tank
      Removal and installation of assembly of the fuel pump with the fuel reserve sensor
      Removal and installation of the locking fuel valve (only American models)
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation of the fuel-supply line going from the fuel filter to the fuel highway - model 163.154.157/172/174/175
      Removal and installation of the fuel tank
   + Power supply system of diesel engines
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Dropping pressure in fuel system of the petrol engine

Location of the service valve (1/1) of dumping of pressure on the fuel highway of the engine of a series 111

1/1 — the Service valve
16/8 — Sealing rings
17 — the Fuel highway

17/2 — the Line of return of fuel
17/3 — the Line of supply of fuel
Y62 — the Injector

Location of the service valve (1/1) of dumping of pressure on the fuel highway of engines of series 112 and 113

1/1 — the Service valve
1/4 — the Screw
2/1 — a resonator Casing
17 — the Fuel highway

17/1 — Bolts
17/2 — the Line of supply of fuel
Y62 — Injectors


 PERFORMANCE ORDER

Before getting to work, get acquainted with the precautionary measures given in the previous Section.

After implementation of the procedure described below you only remove excessive pressure from fuel system. In pipelines there will be a gasoline. Before disconnecting any fuel hose, take all necessary precautionary measures.

  1. The main components of fuel systems of petrol engines are the fuel tank located in it the fuel pump with the fuel reserve sensor, the fuel filter, injectors, the regulator of pressure and a set of connecting lines.
  2. At the working engine fuel in a path of a power supply system is under pressure which continues to remain during even rather long time after switching off of ignition. Before a detachment of any of system components pressure in a step has to be dumped.
  3. The simplest way of dumping of pressure in a power supply system is start of the engine at the taken safety lock of the fuel pump, - wait for a spontaneous stop of the engine, then, for a guarantee of completeness of dumping of pressure, turn it several times a starter. If it is not possible to start the engine, turn it a starter within several seconds. Having finished the procedure, switch off ignition and return into place the removed safety lock.
  4. At car repair shops pressure in a power supply system is dumped via the service valve located on the fuel distributive highway and working by the principle of the simple nipple. Wrap up the valve rags, remove a cap and press the nipple, - do not forget to return at the end of the procedure a cap into place.
  5. Remember that after dropping pressure/removal of fuel on start of the engine leaves a power supply system a little bigger, than usually, time, - it is necessary to turn within several seconds a bent shaft a starter until pressure in system is restored, and fuel will fill all fuel pipes.