Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Automatic transmission
   Search of malfunctions - the general information
   The general principles of functioning of system transmission, the operating signals
   Adjustment of the drive of switching of AT
   Removal and installation of the electrohydraulic control unit of switchings
   Removal and the AT installation with the hydrotransformer
   Removal and installation of the selector module
   Removal and installation of a cable of blocking of the electronic switch of ignition (EIS)
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of the selector module

Release models till 31.08.99

Details of installation of the selector module on release models till 31.08.99 (without function of consecutive switching of ranges of the movement)

39 — Sealing laying
40 — Bolts (4 pieces)
97 — the Intermediate lever
S16/10 — the Sensor of provision of AT

S16/10s2 — the Sensor switch
backing fires
Y66/1 — Em the blocking activator
R/P switchings


 PERFORMANCE ORDER

  1. On release models the selector module without function of consecutive switching of ranges of the movement is installed till 31.08.99. Details of installation of the module are shown on an illustration to which all references which are found in the text belong.
  2. Disconnect draft of the drive of switching from the intermediate lever (97).
  3. Remove an insulating mat.
  4. Turn out 4 bolts (40).
  5. Disconnect an electrical wiring from sensors switches (S16/10 and S16/10s2) and the electromagnetic activator of blocking of switchings R/Ruble.
  6. Remove the selector module, check a condition of its sealing laying (39), - in case of need make replacement.
  7. Installation is made upside-down, - track correctness of installation of sealing laying (39).
  8. In conclusion make cleaning of memory of the module of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).

Release models from 01.09.99

Details of installation of the electronic selector module on release models from 01.09.99 (with function of consecutive switching of ranges of the movement)

1 — the Cable of blocking of the electronic switch of ignition (EIS)
1b — the Lock uvula
1s — the Socket
2 — Allen turnkey Bolts (3 pieces)

3 — the Intermediate lever
4 — Sealing laying
5 — the Contact socket of an electrical wiring
N15/5 — the Electronic selector module


 PERFORMANCE ORDER

  1. On release models the electronic selector module with function of consecutive switching of ranges of the movement is installed from 01.09.99 (see the Head Governing bodies and methods of safe operation). Details of installation of the module are shown on an illustration to which all references which are found in the text belong.
  2. Disconnect draft of the drive of switching of AT from the intermediate lever (3).
  3. Remove the central console
  4. Remove an insulating mat.
  5. Wring out a lock uvula (1b), turn the socket (1s) on 90 ° in the direction specified by an arrow and, having pulled, disconnect a cable of blocking of EIS (1) from the selector module (N15/5)
  6. Turn out 3 bolts (2).
  7. Disunite the contact socket of an electrical wiring (5).
  8. Remove the selector module (N15/5), check a condition of its sealing laying (4), - in case of need make replacement.
  9. Installation is made upside-down, - track correctness of installation of sealing laying. At connection of a cable of blocking of EIS (1) track that the switch of ignition was in situation "0". Make sure of serviceability of functioning of the lock, - a selector lever conclusion from situation "P", it has to be resolved only at the squeezed-out pedal of a foot brake and in position "2" of the lock of ignition, extraction of a key from the lock has to be possible only in the selector lever family way "P".
  10. In conclusion make cleaning of memory of the module of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).