Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Automatic transmission
   Search of malfunctions - the general information
   The general principles of functioning of system transmission, the operating signals
   Adjustment of the drive of switching of AT
   Removal and installation of the electrohydraulic control unit of switchings
   Removal and the AT installation with the hydrotransformer
   Removal and installation of the selector module
   Removal and installation of a cable of blocking of the electronic switch of ignition (EIS)
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal and installation of a cable of blocking of the electronic switch of ignition (EIS)

Details of connection of a cable of blocking of EIS

1 — the Cable of blocking of the electronic switch of ignition (EIS)
1a — Lock uvulas
1b — the Lock uvula
1s — the Socket

2 — the Clamp
N15/5 — Electronic selector
module
S2/1 — the Switch of ignition (EIS)


 PERFORMANCE ORDER

  1. Details of connection of a cable of blocking of EIS are shown on an illustration to which all references which are found in the text belong.
  2. Disconnect a negative wire from the battery.
  3. Uncover under the dashboard at the left.
  4. Squeeze together lock uvulas (1a) and disconnect a cable of blocking of EIS (1) from the switch of ignition (S2/1).
  5. Disconnect a cable (1) from the selector module (N15/5) (see the Section Removal and installation of the selector module) and release it from the dashboard.
  6. Installation is made upside-down. Make sure of serviceability of functioning of the lock, - a selector lever conclusion from situation "P", it has to be resolved only at the squeezed-out pedal of a foot brake and in position "2" of the lock of ignition, extraction of a key from the lock has to be possible only in the selector lever family way "P".