Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Filling and "pumping" of the steering pump
      Check of a pressure of the steering pump
      Replacement of a collar of fastening of a hose of a path of cooling of GUR liquid
      Assessment of a condition of hinges of steering drafts and boots of a case of rack transfer
      Removal and installation of the steering pump
      Replacement of boots of a case of the steering mechanism
      Removal and installation of tips of steering draft
      Removal installation of entrance knot of the steering mechanism
      Removal and installation of the steering mechanism
      Dismantling of the mechanical regulator of a steering column
      Removal and installation of a steering wheel and spiral contact drum of a steering column
      Removal and installation of the cylinder of the lock of ignition
      Removal and installation of the lock of blocking of a steering column
      Removal and installation and shirts of a steering column
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment



Dismantling of the mechanical regulator of a steering column

Design of the mechanical regulator of provision of a steering column

71 — the Shirt
93 — the Lever of adjustment of height
93g — the Nut

93h — Pruzhina
Arrow — the Lock screw


 PERFORMANCE ORDER

  1. The design of the mechanical regulator of height of provision of a steering column is shown on an illustration to which all references which are found in the text belong.
  2. Remove a pipe of a shirt (71) of a steering column.
  3. Having turned out the lock screw (shooter), give a nut (93g).
  4. Remove the lever of adjustment of height of provision of a steering column (93).
  5. Installation is made upside-down, - by means of a nut (93g) adjust freedom of the course of the lever (93).