Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
- Current leaving and service
   Active system of the warning of the term of approach planned THAT (ASSYST)
   Schedule of routine maintenance
   General information on settings
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them, designation of tires and disks of wheels, rotation of wheels
   Replacement of motive oil and oil filter
   Check of the brake system
   Check of a power supply system, replacement of the fuel filter
   Check of a state and replacement of hoses of a motive compartment, localization of leaks
   Check of a condition of multicostal belts of the drive of auxiliary units
   Check of functioning of the cooling system and frost resistance of cooling liquid, liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Replacement and check of the ATF level, replacement of the AT filter
   Visual check of tightness of automatic transmission
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of boots of power shafts
   Check of the air conditioning system
   Lubricant of limiters of doors and cylinders of locks
   Visual control of a seat belt and block of a safety cushion
   Check of operability of headlights and horn
   Check of a state and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the saloon filter
   Replacement of brake fluid
   Check and replacement of spark plugs, check of a condition of high-voltage wires (petrol models)
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Check of a condition of boots of power shafts

 PERFORMANCE ORDER

  1. Boots of power shafts are very important elements since they protect the hinges of equal angular speeds (HEAS) from the hit on them of dirt, water and other foreign objects causing damages. External pollution of boots oil and lubricants can lead to premature failure of their material therefore it is recommended to wash periodically boots with water with soap.
  2. Examine boots on existence of gaps and cracks, and also the weakened collars. In case of detection of signs of cracks or leak of lubricant the cover has to be replaced.

    Check a condition of a boot (1) of a power shaft and reliability of collars (2)

  3. At the same time check the general condition of hinges of equal angular speeds, holding a shaft and at the same time trying to turn a wheel. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any noticeable side play indicates wear of the hinge, wear in grooves of a shaft or an otvorachivaniye of a lock nut of a shaft.