Repair and service Mercedes Benz M - The Class W163 - Removal and installation of the tank of the washing liquid//since 1997 release /

Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of the drive of forward screen wipers
      Removal and installation of sliding telescopic snuffled faroomyvatel
      Removal, installation and adjustment of a cowl
      Replacement of loops of a cowl
      Removal and installation of an emblem Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of the washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross beam of a frame
      Removal and installation of panels of the lower protection of a motive compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of side doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + Equipment of salon
+ Onboard electric equipment



Removal and installation of the tank of the washing liquid

Details of installation of the tank of the washing liquid on the models equipped with faroomyvatel

Details of installation of the tank of the washing liquid on models without faroomyvatel


 PERFORMANCE ORDER

  1. Details of installation of the tank of the washing liquid are shown on illustrations to which all references which are found in the text belong.
  2. Remove the top cross beam of a frame (see the Section Removal and installation of the top forward cross beam of a frame).
  3. Disconnect an electrical wiring and hoses from pumps (5) of supply of the washing liquid and, - at the corresponding complete set, - from the liquid level sensor.
  4. Release a hose (3) of the refrigerator highway K/V from a clamp (4).
  5. On models 163.128 (ML 400 CDI) uncover also intermediate clamps of fastening of hoses to the assembly block of safety locks/relay.
  6. Release the heat exchanger of a cooler (10) from the lower landing plugs.
  7. By means of the assistant raise a cooler (10), turn out a bolt (2), release the tank of the washing liquid (1) from landing plugs (6), take away it inside and, having pulled up, take from a motive compartment.
  8. Installation is made upside-down, - track completeness of landing of the tank (1) in plugs (6) and reliability of a zashchelkivaniye of a side clamp.