Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of the drive of forward screen wipers
      Removal and installation of sliding telescopic snuffled faroomyvatel
      Removal, installation and adjustment of a cowl
      Replacement of loops of a cowl
      Removal and installation of an emblem Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of the washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross beam of a frame
      Removal and installation of panels of the lower protection of a motive compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of side doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + Equipment of salon
+ Onboard electric equipment




Removal and installation of doors

Forward doors

Details of installation of a forward door (on the example of the left door)


 PERFORMANCE ORDER

  1. Details of installation of a forward door are shown on an illustration to which all references which are found in the text belong.
  2. Disunite a contact block (X35/1 or X35/2).
  3. Turn out the screw (1) of fastening of the limiter of opening of a door to a rack And.
  4. Remove from a rack And a boot.
  5. Mark the provision of the lower loopy level on a doorframe, then turn out bolts (2) of its fastenings.
  6. Ask the assistant to hold a door and turn out bolts (3) fastenings of a level of the top loop, - also previously mark its situation on a doorframe.
  7. By means of the assistant remove door assembly from the car, - try not to damage a paint and varnish covering.
  8. If any of loops needs replacement, remove it from a rack And.
  9. Installation is made upside-down, - track correctness of combination of the landing tags put in the course of dismantle and correctness of fastening of a rack-mount boot, in size of regional gaps (see Specifications) make sure of correctness of an arrangement of a door in a body aperture, in case of need make the corresponding adjustment. Make sure of serviceability of operation of a latch of the lock.

Back doors

Details of installation of a back door (on the example of the left door)


 PERFORMANCE ORDER

  1. Details of installation of a back door are shown on an illustration to which all references which are found in the text belong.
  2. Disunite a contact block (X35/3 or X35/4).
  3. Turn out a bolt (1) of fastening of the limiter of opening of a door to a rack of Century.
  4. Remove from a rack In a boot.
  5. Mark the provision of the lower loopy level on a rack In, then turn out bolts (2) of its fastenings.
  6. Ask the assistant to hold a door and turn out bolts (3) fastenings of a level of the top loop, - also previously mark its situation on a rack.
  7. By means of the assistant remove door assembly from the car, - try not to damage a paint and varnish covering.
  8. If any of loops needs replacement, remove it from a rack And.
  9. Installation is made upside-down, - track correctness of combination of the landing tags put in the course of dismantle and correctness of fastening of a rack-mount boot, in size of regional gaps (see Specifications) make sure of correctness of an arrangement of a door in a body aperture, in case of need make the corresponding adjustment. Make sure of serviceability of operation of a latch of the lock.

Back door

Details of installation of a door of a back


 PERFORMANCE ORDER

  1. Details of installation of a door of a back are shown on an illustration to which all references which are found in the text belong.
  2. Remove an internal upholstery of door assembly (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  3. Disunite contact sockets of an electrical wiring (1) and push them in cable channel.
  4. Disconnect an electrical wiring (2) from assembly of an electric motor of the drive of a back screen wiper. Release a plait from a doorframe.
  5. Record a door in open situation and remove a sliding emphasis.
  6. Previously having marked the provision of loopy levels, turn out screws (3) of their fastenings to a doorframe.
  7. By means of the assistant remove door assembly (4).
  8. Installation is made upside-down, - track correctness of combination of the landing tags put in the course of dismantle, in size of regional gaps (see Specifications) make sure of correctness of an arrangement of a door in a body aperture, in case of need make the corresponding adjustment. Make sure of serviceability of operation of a latch of the lock.