Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of the drive of forward screen wipers
      Removal and installation of sliding telescopic snuffled faroomyvatel
      Removal, installation and adjustment of a cowl
      Replacement of loops of a cowl
      Removal and installation of an emblem Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of the washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross beam of a frame
      Removal and installation of panels of the lower protection of a motive compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of side doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + Equipment of salon
+ Onboard electric equipment



Removal and installation of limiters of opening of side doors

Details of installation and design of the limiter of opening of a side door

1 — the Bolt
2 — the Holder of a sealing element
3 — the Sealing element

4 — the Basic arm
5 — the Limiter
6 — the Nut


 PERFORMANCE ORDER

  1. The corresponding illustrative material is presented on an illustration to which all references which are found in the text belong.
  2. Remove an internal upholstery of the corresponding door and separate a first line of a sealing film (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  3. Turn out the screw (1) of fastening of the limiter (5) to corresponding (And or In) to a rack, - try not to damage a paint and varnish covering.
  4. Holding the limiter (5), release nuts (6) of fastening it to door assembly.
  5. Remove the limiter, having released it from a service window in a doorframe.

Release a rubber sealant of the directing trench of a window regulator from a clamp and shift it lengthways on a limiter level.

  1. Installation is made upside-down, - track correctness of landing of a sealant of the directing window regulator trench, grease the screw (1) of the limiter to a rack before a vvorachivaniye with glue, in case of need replace the damaged sealing film of door assembly.