Repair and service Mercedes Benz M - The Class W163 - Removal and installation of door locks//since 1997 release /

Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of the drive of forward screen wipers
      Removal and installation of sliding telescopic snuffled faroomyvatel
      Removal, installation and adjustment of a cowl
      Replacement of loops of a cowl
      Removal and installation of an emblem Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of the washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross beam of a frame
      Removal and installation of panels of the lower protection of a motive compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of side doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + Equipment of salon
+ Onboard electric equipment



Removal and installation of door locks

Forward doors

Details of installation of elements of castle assembly of a forward door


 PERFORMANCE ORDER

  1. Details of installation of elements of castle assembly of a forward door are shown on an illustration to which all references which are found in the text belong.
  2. Remove an internal upholstery of a door and a sealing film (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  3. Remove the external handle of a door and its bearing arm (see the Section Removal and installation of external handles of doors).
  4. Remove the directing trench of a window regulator (1).
  5. Turn out fixing screws (3).
  6. Disunite the contact socket (5) of an electrical wiring of an electric motor of the drive of the door activator (M14/5 or M14/6).
  7. Omit castle assembly (2) down and take it from a doorframe through a service window.
  8. Disconnect a driving cable (4).
  9. Installation is made upside-down, - the damaged sealing film should be replaced.

Back doors

Details of installation of elements of castle assembly of a back door


 PERFORMANCE ORDER

  1. Details of installation of elements of castle assembly of a back door are shown on an illustration to which all references which are found in the text belong.
  2. Remove an internal upholstery of a door and a sealing film (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  3. Remove the external handle of a door and its bearing arm (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  4. Completely close door glass.
  5. Disunite the contact socket of an electrical wiring (4).
  6. Turn out fixing screws (1) and accurately take castle assembly (2) through a service window (3) in a doorframe, - the directing trench of a window regulator should be allocated slightly forward for a lock transmission under it.
  7. Installation is made upside-down, - track correctness of landing of the directing window regulator trench. The damaged sealing film should be replaced.

Back door

Details of installation of elements of castle assembly of a door of a back

4 — the Bolt
5 — the Internal upholstery of a door

M14/7 — the Driving electric motor
back door lock activator


 PERFORMANCE ORDER

  1. Details of installation of elements of castle assembly of a door of a back are shown on an illustration to which all references which are found in the text belong.
  2. Remove an internal upholstery of a door (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  3. Disconnect draft (3) from the door handle (6).
  4. On release models till 31.08.99 disunite the contact socket of an electrical wiring (8) of the toggle-switch microswitch (S88/1).
  5. Remove the door lock (2) and the drummer (7), previously having marked position of the last.
  6. Installation is made upside-down, - track correctness of landing of the drummer of the lock (7). In case of need adjust landing of a door in a body aperture (see Specifications).